At some point in the past (my downloads folder claims August 15th, 2018), I decided that I needed a skirt with the skyline of my town on it. So I scoured the web looking for a picture with the skyline and managed to find one on a Christian website that seems to have been taken down since. The picture went though some fine MS Paint-ing and had all the coloured background removed. I then printed the results on A3 paper to see how large it would need to go to be able to cover a skirt. That was .. September 2018 and I promptly forgot about the whole thing.

About two weeks ago, I remembered this project and decided to go ahead and try to get it started. Step 1, find a good skirt pattern. Step 2, cut out the pieces of the skirt from the smallest bit of fabric possible. Step 3, serge the sides of the skirt pieces and put them together. Step 4, measure the amount of coverage the skyline needs to be. Step 5, print the skyline again because the older version was too short. Step 6, embroider the skyline on the skirt. Step 7, finish sewing the skirt together.

Step 1 was a bit of a struggle to start with, since making choices is HARD! At the end I made the choice for Simplicity Naaimode 27’s model 3-4 (aka Simplicity 1324). A knee-length skirt with a contrast mock wrap at the front. Going through the hoard, I found a piece of fabric that I also used for a larp thing ages ago. There was only little fabric left, so the skirt pieces were on one grain, while the front bands and waistband were on another grain entirely. The sides were serged and put together after which I measured and printed the right size skyline. I sat down for a night and managed to stitch the skyline in with some thick white thread.

I did make a change the skirt and added a pocket in the right seam, since skirts without pocket(s) are not useful bits of clothing if you ask me. In the same vein, I also added belt loops to hold my keys.

On Friday there will be a little reunion for employees and I figured that would be a good time to test whether this skirt works. It should be somewhat appropriate, I hope.
