House Bear

Made a cover sweater to fulfil my ultimate baby bear dreams.

My body temperature regulatory system is out of whack sometimes. That means that I’m cold, most of the time. You can regularly see me walking around the house in a second sweater. It’s large, beige, has thumb loops in the sleeves and a hood. It’s hideous but I love it. I decided recently that I needed another like it. Something fluffy, warm and preferably a little whimsical.

So I put a mat on the floor that I could pin into, put some pattern paper on that and grabbed the original. I spread the sweater onto the paper and started drawing the edges and pinning the seams of the pieces. It took a while, but I eventually got all that I needed. I cut those pieces from a black fleece blanket and freehand cut some ears. The pocket bags were cut from an old discarded jersey top. I sewed everything together by treadle and got out the overlocker to finish all those seams. That last step was very relevant because this fabric sheds like you wouldn’t believe.

The thumb loop and all visible edges were finished with jersey bias tape, same as the beige original. I discovered that sewing with the nap was so much easier, so I had to do some interesting manouvering to make that possible. Since I finished it about a week ago, it’s been in regular rotation as something to just chuck on. It might not be the prettiest, or most elegant thing I’ve ever made, but it perfectly does the job it was intended for. Time to live out my ultimate baby bear dreams!

Winter is Coming!

While you may think from the previous post that my head is still in summer land, it is actually cold over here. I don’t particularly like the cold, so the last time (I think?) I was at the fabric market, I bought a meter of something red, thick and stretchy. I figured I might be able to make a sweater out of it. Well, my size turned out to be a blessing, since I could actually get a long-sleeved sweater out of that 1 meter. If I’d been only a little bit hippier, it would not have fit!

I chose to use my t-shirt pattern and just elongate the arms. Why do it the hard way, right? Then I copied the hood of a sweater I’ve bought and futzed a bit to get the hood to fit in the neck hole. In the end, it all worked out. I had the body of the sweater lying in my room since Monday, but I was a bit scared to attach the (finished) hood. I bit the bullet today and attached it. It worked the first try! Then I wanted to make thumb holed cuffs. So I found myself a tutorial (this one, thanks!). I only had to redo the first one three times. 1st time: I did the second seam the wrong way round because I was too stubborn to read the instructions carefully. 2nd time, it went right but the opening was a bit big, so I ripped it all out and for take 3, I angled the seam and that worked fine! The second one worked in one go! Yay, for learning. Lastly, I attached a bottom band. Red T-shirt Sweater Hoody thing is a reality!

Front and back, naturally.

Front Back

Thumb hole and insides. I only sewed a few bits with my sewing machine (inside of the cuffs and bottom band, ‘topstitching around the hood’ and the pointy bit where the hood attaches), the rest was done with the serger. I only have white or black thread, there was white still in it and I was too lazy to switch, nor did I care about the colour.

Thumbhole Insides

Hopefully I’m now ready for the real winter times! It should be quite warm!