Knitting – Page 2 – Hopefully Creative

Batwing Knit

A vintage knitting machine pattern in some muted fall colours.

The booklet that came with my knitting machine also had a pattern for a striped ladies pullover with V-neck, DP 2219. This seemed like a fun thing to do with the knitting machine that wasn’t a rectangle of some sort, so I set out on a quest to complete the pullover. This started with dyeing yarn. I chose upcycled quarter round yarn, a sock weight with 425 m/100 g and tried to dye it in the colour scheme of a picture I found on the internet.

It didn’t turn out the way I hoped, although I’m not sure exactly what I was hoping for. However, once I started knitting it up, I knew it didn’t really fall within the colours I would love to wear. Still determined to see if the pattern would work, I continued. I made one major change, by decreasing the depth of the v-neck, but apart from that followed the instructions. I finished knitting the front and back, and blocked them. Then I lost motivation and it sat in a bag for a while until I met up with a friend. These colours suit her much better, and I knew I needed some sort of external motivation if I were to ever finish it, so I asked if she might be interested. She was.

Batwing knitting machine sweater on a dress form, front

Batwing knitting machine sweater on a dress form, v-neck detail

So I knit the neckband and after some cursing and annoyance managed to get that installed in a way I liked. It’s probably not the way the pattern intended, but it’s on there now, so it’ll do! The sleeves and bottom still rolled quite badly, so I decided that it needed cuffs. I first knit some in a mock rib on the knitting machine and had them attached before deciding that the join was too awful. So I ripped it all back, cast on ribbing and knit it by hand, both around the cuffs and the bottom.

Batwing knitting machine sweater laid on the floor, front up

Batwing knitting machine sweater laid out on the floor

I think I probably asked before summer whether my friend was interested (providing no guarantees on when it would be completed) and it still took me until September to get it finished, but it is done! She enjoys it, I’m happy to have made something out of the yarn that I wouldn’t use for myself, I liked testing the pattern and doing something different on the machine. A bit delayed, but still a win in the end!

Tea Cup Scarf

Loopy scarf that pretends to be a teacup.

One of my friends had a birthday in August and I decided to use this as an opportunity for gift giving and reducing my yarn stash. I still had more of that pink stuff laying around that would suit someone who likes pink a lot better. Inspiration was easily found since Pinterest had thrown up a ‘tea cup scarf‘ at some point, and I knew she liked tea.

Rolled up pink and brown scarf that vaguely resembles a teacup

Skein of brown variegated yarn with a label reading Arequipa Singles and other details.

So I set out to dye some Arequipa singles yarn in ‘tea brown’ (some combination of ‘brown’ and ‘chestnut’), and after it dried, just started knitting on the knitting machine. I cast on 60 stitches on gauge 5 and just zoomed my way through almost the entire ball. I held back a few meters of brown for finishing, then attached the pink yarn and knit until that also ran out. With the last sections, I knit a ‘handle’ for the cup. Then everything got blocked on the hoard room floor, taking up the entire length. This seemed a little.. much.

Pink and brown knitted scarf with a loop on a mannequin

Pink and brown knitted scarf with a loop and a knit tea-bag on a mannequin

To remedy that problem, I made the scarf double layered by bringing the brown end up to the start of the brown and knitting down the sides and doing the same thing with the pink. I also added the handle when I was sewing down the pink sides. To complete the teacup look, I knit a small pouch (to hold some stitch markers) and attached a little tea-bag-label with an embroidered cup. I think it turned out pretty cool and it was a fun way to deal with some more of the pink, while making sure it went to a better home than mine!

Portia Shawl

Three triangles together for a geometric scarf.

When trawling Ravelry for more patterns to diminish my stash of yarn, I found this interesting shaped shawl: Portia Shawl by Corrie Purdum. It’s basically three triangles together to form three quarters of square. The claim is that because of those points at the front, it stays over the shoulders well. With the summer happening, I haven’t been able to fully test this, but I expect it to be true.

Portia Shawl in gray and green on a mannequin

For the yarn, I chose Krypton sock yarn (100% merino), dyed unsaturated black with dark green in March of 2023. I actually have another ball of this, and this shawl didn’t finish a full ball, so if anyone has suggestions for a project that uses 100 g + a little bit extra, let me know!

Portia Shawl in gray and green being blocked on light blue blocking mats

Detail of eyelet pattern of Portia Shawl in gray and green

The pattern is straight forward and once you get the hang of it, it’s fairly easy to memorize. For fun, I added one extra repeat in the big central diamond shape. The pattern indicates that this scarf needs to be blocked to within an inch of its life. I didn’t manage to stretch it as far as I should’ve. I’m unsure how anyone would manage. I did enjoy playing with my new blocking wires, it does make it easier when you have a meter wire instead of 30-40 cm.

I made a choice with the blocking that the back edge would be blocked to little points, while the ‘sides’ would be blocked straight. This results in different kinds of edges which I think is interesting. I also like that the green randomly appears every now and again. I’m now just waiting for fall for some better shawl wearing times!

Newsboy Cap & Beret

Two green wooly hats, with brim and without.

I have so much dyed yarn and not enough projects, so I cast on for a quick and easy hat to reduce the stash by one ball of yarn. The yarn was Donegal DK yarn, dyed with dark greens in December of 2023. I chose the Knitted Newsboy Cap by Nicola Robinsonova as the pattern.

I first cast on for a hat on 4.5 mm needles, and was on gauge following the instructions. The pattern is very easy and I managed to finish it fairly quickly, however, when I put it on my head it was more a beret than a newsboy cap. A bit too tight for my liking. I did continue to knit the brim to see how it would work together. I own some plastic brim inserts so I modified the brim pattern a little bit by knitting short rows to mimic the insert’s shape better. I pinned it together and it was just too tight.

Two differently sized newsboy caps on a ruler background

Newsboy Cap in dark green with blue buttons

Luckily, the pattern also listed a more slouchy version using 5.5 mm needles and after weighing my leftover yarn, I hoped I would have enough. So I crossed my fingers and cast on. Who knew that 1 extra mm of diameter would make such a difference! This new version is a perfect amount of slouch and makes a lovely hat. To add a safety/fun touch, I also knit a band with reflective yarn that’s attached with two very cute blue buttons. When I cycle in the dark, I should light up!

Leftover yarn from the knitted newsboy cap

Newsboy cap in dark green with detail of blue button

There is less than a meter of this yarn left, and my bucket of dyed yarn has reduced in size a little bit. My stash of hats has increased by two: one green beret and one green slouchy brimmed hat. Best way to ‘mess up’ a project is to end up with two great end products!

Experimental Pinks

Experimenting with colours and knitting machine settings.

At some point, I did some experimenting with dyeing yarn with some red sprinkles. I wasn’t a fan of the end result because it was very pink, and pink is the nemesis colour. So I decided to still use it but gift the resulting thing to a friend and get it out of my house. It was also a great opportunity to try out different things with my knitting machine.

I cast on almost the full bed of my knitting machine, since there are some broken bits not all needles can be used. Then started knitting as normal, decreasing one stitch on one side every four rows. The first thing I tried was gauge stripes (one of the examples in my instruction manual), by knitting rows with the largest gauge (10) and decreasing one step in the gauge every four rows until gauge two. Next, I changed the gauge every three rows, when that was finished every two rows and I even ended up doing 1 row per gauge change. It’s a fun progression to see.

Some simple flat rows came after before continuing with a different example in the instruction manual where two rows are knitted on a small gauge that makes tight stitches and then two rows knitting on a high gauge with looser stitches. The book also had a pattern with putting stitches on hold that looked quite interesting, like a hole with two lines of yarn through it. Because this was quite a lot of work per stitch, I only did a few rows of this.

I tried a section where I decreased every fourth stitch and then put those needles that no longer have a stitch out of work. When knitting, this creates a slightly larger hole between the stitches still in work and the non-knit needle. I like this one. To go back to normal, you add a stitch back to the needles that were out of work and put them back in work. The last one was a cable inspired pattern, I think. It didn’t work as nicely on the knit side of the scarf, so I’m not sure I’ll use it again.

Once all of the knitting on the main piece was concluded, before Christmas, the scarf disappeared into a bag to be forgotten. Until the start of April, when I decided that it was probably time to finish the thing. I wanted to add an anti-roll edge so I did the same thing as in my previous pirate’s cove scarf. It took most of the day, but I did manage to finish it. It’s been wet blocked to hopefully keep the shape.

It has since found its new owner and although I doubt it’ll be worn soon (summer and all that), I hope that it’ll be a useful addition to my friends wardrobe!

Roxy Blues!

All the blues in this sweater

Browsing Ravelry a while ago, I found a pattern that I really liked, called
Roxy Sweater by Lucienne Tricote. I even added it to my Queue on Ravelry, not an often used feature for me. To make it a reality, I needed a yarn that wasn’t too stripy, but I also didn’t want a solid colour sweater. So I decided to use multiple dyes to create a variation of shades of blue. The most accurate colour is in the final image of the post.

So I dyed some Gold Sport 300 yarn by putting four skeins into my chafing dish and adding different shades of blue over the top. I chose the Jacquard dyes 621-626, Sky Blue, Sapphire Blue, Brilliant Blue, Turquoise, Royal Blue and Navy Blue. Then I added a little 637 Gun Metal. The gun metal didn’t do much apart from somehow producing a few green spots? I decided not too care too much about that.

For the body, I cast on in twisted German cast on on size 3.75 needles, but this seemed tight. I knit the rib section and up to the row of eyelets. Then started the sleeves by casting on the stitches on size 4.5 needles (I think), this felt a lot better, much stretchier. Once the sleeves were done, I continued with the body until the point where the sleeves were supposed to be connected to the body. This was the single most boring knit I’ve ever done. I was so frustrated with the absolutely endless stockinette that I almost wanted to chuck it into a corner for a century. I did, however, persevere!

Once I had the body and sleeves at the right length, I decided that I hated the body cast on too much, so I cut it out. It was replaced by a much stretchier cast off. The body and sleeves were attached together and that marked the start for more interesting knitting, with the raglan sleeve decreases, the eyelet section and the garter stitch bit. I had to redo the neck section four times, too tight, too low, too stretchy, etc. I’m happy with what I ended up with though. The finished product is a little shorter than the pattern calls for, because I wanted to wear it with my dark dungarees. This is now my favourite outfit even if I will try to avoid endless stockinette handknitting with yarn this thin for a good long while.

Anna Crop Top

All the greens in a little crop sweater

I was looking through Ravelry again, as I sometimes do, and found a crop top sweater that looked really cool. It was the Anna Crop Top from Wiam’s Crafts and I decided that I needed one. So I grabbed some of my Ultra Aran and put it in the chafing dish. The sprinkle effect was created by putting 5 dye colours and citric acid in a little salt shaker and just shaking it all over the yarn. The colours were Jacquard Acid Dyes Spruce, Kelly Green, Chartreuse, Teal, and Emerald. In total, I dyed 4 skeins for the project.

When I started knitting this thing, I was extremely afraid that I’d run out of yarn. So I cast on two sleeves at the same time and hoped that it would work out. I did make a fair amount of changes to the pattern that led to both extra yarn used and less yarn used. In the sleeves, I started them with fewer stitches and decided to do gradual increases. But in the body, I added extra stitches to the bottom because it was very short.

When I knit the right amount of sleeve on both sides, I cast on the total number of stitches that I wanted to end with (a few more than per the pattern). Then some short rows to get the shaping effect. I tried doing the pattern instructions first, but it just turned into a lumpy mess so I gave up. One skein was enough for the full sleeve plus the start of the body. Then I attached another skein to one of the sleeve-body things and continued knitting the rest of the body, front and back. I didn’t want to join it in the middle but on one side, and used Russian Grafting to put it all together.

The join is nearly invisible on the knit side, but there is a little interest on the purl side, which is the side that is showing. Still, you don’t see if from any distance. I’ve not really worn it out yet. I tried it with a pair of dungarees that I recently made and am in the process of writing up, but it was still a little too short and I was worried about the cold. It might be more of a spring/summer thing than a winter thing.

Greener Frog

A bright green frog for all your dressing needs.

The first frog was great, but he was more toad coloured than I wanted. So I decided to get on a new frog. This started by dying some yarn bright green and slightly lighter green. I think I measured ten grams from a skein of Titanium Sock yarn and then dropped it into a green bath. It didn’t exhaust entirely, so I dropped 10 more grams in to make some light green yarn.

As usual, the actual knitting time for a frog is very short, however, convincing myself to finish adding the arms and legs took several weeks yet again. I started him on October 22 and finished on November 26. The back, arms, and legs were done with a combination of the bright green sock yarn and DROPS Kid-Silk in 18 Apple Green and the tummy was the light green sock yarn and Søstrene Grene Mohair Blend in 1650 Blanc. He’s got wires in his arms and legs and is posable. I’ve not tried to pose him yet because I still want to make some clothes.

The original frog has since found a new home and I’m more than happy to have this one hanging out on the dinner table!

Apiarist Cowl

Honeycomb cowl from some blue and yellow yarn

Some time ago, I bought some lovely blue fabric to make a new winter coat out of. I’ve even decided on the pattern but I’ve not yet managed to convince myself to actually start the project. Instead, I’ve been working on accessories for that non-existent coat. The plan for the coat is that it will be blue with yellow accents and while I’m not sure if that’s going to work out, I have started with that idea in mind anyway.

Since I knew I needed a scarf and potentially a hat to go with my to-be-coat, I dyed some yarn with blues and yellows. I chose Ultra DK and added a fair amount of bright blue speckles and both soft and bright yellow speckles on 22 September 2023. Somehow the yellow came through a lot better but I do like the specks of blue here and there.

Once it was dry, I had to find a pattern to use. The one I chose was the Apiarist Cowl by Claire Borchardt and I started knitting on November 12. I did make a fair few changes to the pattern since I didn’t like the ribbed edge that the original has. A seed stitch edge was included instead. The hight of the honeycombs is also one stitch less (mainly because I can’t count for shit and messed up the first one and decided to go with it).

This was a quick knit (for me) that was mainly completed on trains over the course of a month and a half. Finished on December 26 and since worn fairly often. It’s just a little bit tighter than the Linen Stitch one that I’ve been wearing a lot this fall and winter. Did I entirely forget that I made another one that would work much better; yes. It’s been living in a box since I had to move all my shawls, scarves and gloves away from the hallway where they had been living due to construction dust.

Seas Shawl

Thick and thin yarn to make some waves.

In my last big undyed yarn purchase, I included 10 skeins of ‘Thick and Thin DK’-weight yarn. It’s single ply but it varies in thickness along the length and therefore has an interesting sort of effect. I wasn’t sure what I was going to do with it, but I was intrigued by how it worked. So I set off to dye it with some soft yellow and green sprinkles on 3 June 2023.

Once it was dry, I had to figure out what to actually do with it. I tried several patterns until I ran across the Seas Shawl by Puff Updater. It seemed like a fun, slightly involved pattern that wouldn’t mind the uneven nature of the yarn. You can still lightly see the waves made by increases and decreases, hence the name, I guess. I started on July 23 and finished it on November 19. It traveled with me a lot, together with an ever more crumpled piece of paper with the instructions on it.

After blocking and pinning out some points, it turned out a bit smaller than I hoped. I knew I would never really wear it as it was. So I decided to ask one of my colleagues if she was interested and it has now found a nice new home. The end result is only a small part of what I enjoy about knitting. It’s mainly the relaxing nature of knits and purls that keep me coming back to the needles.

Category: Knitting