Dyeing – Page 3 – Hopefully Creative

Proof of Concept Dyeing

Trying out some more dyeing ideas.

“What happens if you separate out random partial sections of yarn and dye those a different colour?” Was the question that spurred the 28 March round of dyeing yarn. I wanted to try and see if it would 1) be possible to even separate out different parts without making it impossible to ball up later and 2) whether that would then create a more random pattern. I started with two skeins of Krypton 4ply yarn and started pulling out random strands and strand sections. The majority of the skein was dyed with a low percentage of black. It’s more grey in appearance because of that. The strand sections that were left out were dyed a nice dark green.

The second skein was Alpaca 4ply sock and got the same separation treatment. I wanted to dye this a bright light blue/turquoise colour with the contrast being navy. However, part of the skein that wasn’t supposed to be navy fell into the pot so there are some more blue spots than intended. I also had another skein of Alpaca 4ply sock that was dyed in some leftover yellow dye. Later, some orange and brown speckles were put over the top.

The first and second experiment also had some leftover dye in the pot, so I wanted to test out the Tweed Effect DK yarn that’s been hanging out in the cupboard too. I took a full skein and started it on the yarn winder until about half was into a ball. Cut the skein and had two tweed experiments. The ball was unwound gain and dropped dry into some blue dye. It did actually take on the barber pole effect that was indicated on the website. The green experiment was not as successful. The yarn came out very uneven and without much barber-poling.

After these experiments, I’ve been able to answer question 1. Yes, it is possible to separate out without making it impossible. It did take a bit longer than normal because certain bits didn’t want to let go of each other. I’ve not gotten around to question 2 though. I’ll report back once these yarns have reached either the knitting machine or the needles!

Yellow – Turquoise – Orange

Made some baby gifts from self-dyed yarn and other happy fabric.

Baby gift time again! First up, dyeing. On the last day of 2022, the second dye project was a single skein of Chester Wool DK 115 (Worsted) 50s. It is 100% merino and has 50 grams in a skein for around 100 meters of yarn. Since I still had soft yellow dye stock left from the other dyeing I did that day, I put 20 ml of the stock in my pot. Then I added several resists around the skein and dropped the thing into the pot. When it had simmered for long enough, I took it out and dyed the resists turquoise. I couldn’t resist adding some speckles and chose orange. All in all this meant that the skein turned out extremely bright and cheerful. If you ask me, perfect for a baby.

Since there was going to be a new baby, I set out to make some baby things and settled on these two patterns: Easy Peasy Baby Ball by A la Sascha and Tiny Tot by Kristen Rettig. One is a rectangle hat with tassels or pompoms and the other is a ball. I used up the entire skein in the making of these projects, so no leftovers!

I’ve also had a bit of flannel in the stash with a similar colour scheme. There’s also some additional red and green, but I wouldn’t let that stop me. The flannel was bought to make some poppies, so I set out to do exactly that. I tried to make these somewhat symmetrical with the plaid, so the scale was based on that. There’s some difference between these two poppies, one has a green stripe near the head, the other green. One has larger hands, the other smaller, but they are still very similar.

Both knitting patterns were quick, easy to knit and went smoothly. Of course the hat is way too big for the recipient, but I guess my track record stays intact on that score. The last item for the little baby was a spit scarf. Now with skateboarders, rope jumpers and a terry cloth back. It feels very soft even if the snap is on the wrong edge.

I hope the little one will have a marvelous and colourful life!

Coat Cowl

Now that the cold season is over, I finished my neck warmer.

In December, I dyed a skein of yarn (Chester Wool Ultra Aran) in dark blue with orange/brown specks to match my dinosaur coat. The plan was to make a cowl that would go with it, to protect my neck from the cold and wind. There is a lot of wind where I live, so this seemed like a necessity. I did already have a cowl, but it was much wider than this new one I was planning. After searching through Ravelry, I settled on the Whirl Me Away Cowl by Samantha Main.

The instructions indicate to replace the left needle tip with a thinner one, so it’s easier to pick up the stitches. So that’s what I did, the right needle was 6 mm and the left 4.5mm. It actually did help a lot with catching the stitches. I cast on 121 stitches and did the stitch pattern indicated until I felt like it was long enough. This took forever! The stitch pattern is very slow even though you’re theoretically knitting big stitches. Once it reached over my mouth, I started deviating from the pattern and cast on extra stitches on the sides in order to create a sort of flared base. This was pure improvisation, the amount of stitches cast on, the amount of rows between etc, it was all seat of the pantsing.

Once the main knitting was completed, I needed to bind off. I tried at least 4 different methods but they all flared too much and didn’t look good. I didn’t want to do a sewn bind off because they take for ever, and I was at a roller derby game. At some point I decided on the plan, and lost yarn chicken by about 10 stitches. So I took the entire bind off out again, frogged some stitches back and redid the cast off. Project done, you’d think. But no. There were some white spots on the cowl where I didn’t put enough dye on the resists initially. So I dunked the finished project in some water, put new dye on those white spots and steamed the whole thing. It was so much better afterwards. I’ve worn this thing almost every day since it was finished. I’ll definitely call this a success!

Knitting Machine Scarf

Dyeing and knitting a stripy scarf.

Since the knitting machine entered my life, I’ve been looking for things to use it for. Recently I watched a tutorial about knitting a very pretty scarf on a knitting machine. It’s by Ingunn Hvatum and can be found here. The pattern itself is not very difficult, so it seemed like an interesting challenge. It did take a little bit of learning to achieve the eyelet edge smoothly, but that’s what practice is for!

You start with three stitches and every second row you create an eyelet and make the scarf that little bit wider. This is done until you are halfway through your yarn (in my case), or if you follow the instructions until you have engaged all needles. Once you are halfway, you knit 4 rows and then start decreasing one stitch while still creating an eyelet. Once you have three stitches left, you bind off.The last instruction is to crochet a chain and thread it through the eyelets.

For this scarf, I used one skein of self-dyed 100% merino wool (Quarter round by Chester Wool), which is around 400 meters. The skein was dyed a light grey while keeping a small section out of the dyebath. After the grey had set, the white area was overdyed with a mix of navy and green dye which resulted in a sort of petrol colour. Some orange transfer can also be found from the rainbow skein that was dyed at the same time. The aim for this one, though, was to do dark green, but I do like this end result. At some point, I accidentally cut through a thread so I ended up with two balls of yarn, one about 97 grams and one 10 grams. After knitting the scarf, any yarn that was left over was dyed with the petrol stock to make the crochet chain for the eyelets. All in all, a happy accident.

Once the scarf was knit, I had to block it because it was rolling over on both the eyelet and the neck edge sides. I thought it would be a right angled triangle, but while blocking that turned out to be wrong, so the point is a little more obtuse than I figured it would be. I still like it a lot. Once the crochet chain was attached, I still had a little bit of yarn left over, and I decided to add tassels to the points. Not sure how they will do if this thing ever sees the washing machine, but that’s a concern for some other time. For now, I’m just going to enjoy wearing this cute triangle scarf.

Cake Yarn Dyeing Experiment

Experimenting with colour gradients.

I’ve been interested in trying to see if I can dye a skein gradually transforming rainbow colours from the start to the end. What I mean is that I don’t want the rainbow to repeat, just that the one end is red and migrates through orange, yellow, green, blue, indigo and ends up as violet. So I decided to try and see if it was possible to wind up a skein and then divide it into seven and dye each of those pieces. While playing around with the yarn winder, I discovered that this was not really possible because it needs to continue turning the other remaining parts otherwise I assume tangles. So I gave up on that plan for the day and just continued winding the ball. It turned out very loose, so that gave me a new plan.

I put the new loose cake in a bath to soak for a little bit and went upstairs to the dye cupboard for a pan, a metal basket and the first leftover dye stock I could find. This turned out to be something I’d scribbled ‘blue-grey’ on, so I guess this experiment was going to be blue-grey. Once the cake had soaked enough, I put it in the basket to leak a bit of the water. The dye stock was added to the pan with more water and some vinegar. The basket was lowered into the water and then simmered for 30-40 minutes. After that, it was left to cool. The yarn was Natural Boo DK, a merino and bamboo mix.

The reason it’s an experiment was because I wasn’t sure how the dye would be soaked up by this loose cake. Would it have lots of white spots? Be darker on the outside or underside? Would it turn out very light? Would it even work? Turns out that the bottom was indeed much darker than the top, which still had some white remaining. When it was dry and I balled it up again, inside out, it turned out much lighter than to start with. It reminds me of the colour of jeans, perhaps it’ll be a fun scarf!

Dyeing with and without a Plan

Adventures in dyeing, with and without a plan.

Last Friday, after some very busy weeks at work, I needed to take the day off. First some sleeping in, but then I decided to actually go do something. The plan was to dye a skein in the colours of my Momiji coat so I could knit some sort of neck covering. I grabbed some superwash merino aran wool and put some tie wrap resists on it. The plan was to dye the skein (dark) blue with white spots. Then I could syringe some brown/orange dye into the white spots. The skein went into the pot dry and immediately soaked up some of the navy/blue combination dye. This means that some areas are lighter blue than others. It’s also a little darker than the aim, but I hope it’ll still look good once knitted up.

While I was waiting for the dye to set, I decided to experiment some more. The second plan was born quickly: lets make some rainbow yarn! It’s a superwash merino sock yarn that was soaked beforehand. I put it all on some plastic and prepared my dye colours: red, orange, yellow, green, turquoise, blue and purple. However, when I started syringing the ‘orange’ dye on my yarn, it turned out that it was red – always label things, don’t just guess (fail 1). I added some actual orange next to it. Then I wanted to put on some yellow, but I put it on the red side, not the orange side (fail 2). So I quickly put purple dye over it to keep some sort of rainbow. Less ideal. Next step, the blue that decided to squirt all over the still white part of the yarn (fail 3). I sighed, added the turquoise and green and then decided to just use the remaining white bit for colour speckles. So I put some of the leftover dye in the white area. This skein turned out partially rainbow partially speckle. We’ll see how insane it’ll knit up.

I still had two more skeins soaking without a plan – I guess I started the day a little ambitious. Luckily there was still something that I’d wanted to try for a while. A sock weight skein with colour gradation, by leaving it in longer in some areas than in others. So I put some grey dye in the pot, and added tie wraps through which I could jam wooden sticks to keep an amount of yarn out of the pot. I set a timer for three minutes and lowered a little more yarn into the pot every time it went off. I did forget to take off the tie wraps, so I accidentally added resists. However, I’m happy with how it turned out, so that’s not a waste.

The last skein was just.. put it in an oven dish, add water, squirt leftover red and orange dye on top and heat set it in the oven. No rhyme, no reason, just bright colours. Not sure what I’ll end up doing with that. I think it is aran yarn, so it should knit up pretty quickly once I get around to it. All in all, I really enjoyed my day of dyeing! However, dyeing eventually leads to having to wind up the yarn, and that’s never super fun. So today I set out to buy myself a helpful tool. This yarn winder thing is so helpful, much quicker and easier than when I play around with a plastic bottle. Of course, it still takes forever when there’s a knot, but I did manage to wind up one of the aran balls in about 10 minutes (win!).

Forgotten Socks

Recovering a lost sock project and finishing it in three days.

Sometimes I take a look at my works in progress in Ravelry and decide that I have too many on. I then go to search around for projects that I either feel like completing or that need to be frogged. In this case, I frogged three and found one project that was already 80% or more completed. I’d forgotten I started them a day after completing the previous sock project in October 2021. It also uses the same self-dyed yarn but uses a different pattern. This pattern is called Hexenzirkel by Sonja Köhler and has a very cute zig zag cable pattern. The Ravelry project can be found here. I chose to do the pattern on the side of the foot.

When I recovered the project, it was in a bag with a print out of the cable chart with tick marks. Past me was more organized than current me expected, that’s for sure! I decided to complete a few more rounds of the chart and then start the 2×2 ribbing. It didn’t require much time at all to complete and I’m unsure why it ended up in a bag in the bottom of the box of shame. Hopefully I’ll get around to wearing these every so often, however, I expect a fate similar to the other ones. Nice to look at, very few wears because I’m just not used to hand knit socks.

Karen Scarf & Dyeing Yarn

Dyeing some yarn and knitting a zebra scarf

A while ago, I’d invited my former colleague Karen out to do some yarn dyeing. We picked out some yarn (a DK zebra yarn and two merino sock weight yarns) and set those soaking. Then we needed to decide on some colours. We’d early on decided that it was mostly about playing, we wouldn’t be able to fully predict the outcome so it was mostly about seeing what would happen. The plan for Karen’s sock yarn was to make it half blue and half terracotta coloured, possibly with some speckles over the top. The terracotta was made by combining orange and brown dye and letting about half the yarn sit in that while the other half was coiled on some metal objects in the pan. It worked remarkably well and I was in love with the colour. We then put blue dye in the pot and put the other half in the dye. I look forward to seeing what it will end up being!

For the zebra, we used some blue dye stock and then added magenta and violet speckles over the top. The yarn already has partial strands of black in it, hence the name ‘zebra yarn’. We weren’t sure at all how this would turn out, but it was really quite nice. I decided to ball it up and start knitting a thin scarf. I first tried December is for Stephanie by Lorena Haldeman, but then switched to a modified January is for Karen by Lorena Haldeman. The name was pure coincidence but I did appreciate it a lot. In contrast to the original pattern, I only did one repeat of the center pattern and tried to make it more symmetrical. This meant I had a total of 23 stitches, including 2×3 edge stitches. My modifications are available here.

The last sock weight yarn ended up a mid muddy. I used a roasting bag and just added colours in. I think it included yellow, red, orange, but also some grey. The plan at the moment is to try and knit some up to see if it looks nice. If it doesn’t, I’ll overdye it with something else. No use in having yarn that won’t be used.

The day itself was lovely and I really enjoyed just trying some things to see what would turn out. It’s great to be able to play with some colours and having lovely chats with a friend.

Rainbow Socks

Double experiment with dye and with a knitting machine.

I recently acquired a Knittax S knitting machine and to thank the original owner, I am making him socks.

The yarn I’m using is Alpaca 4ply Sock: 60% Superwash Merino 20% Superfine Alpaca 20% Nylon sock yarn, purchased from Chester Wool. This yarn is so soft, I love it. It was hand dyed by using it as the ‘cleaning tool’ when making up some pots of citric acid with Eurolana dyes. The spoons that were used to put the dye in the pots, was wiped on the wet yarn. The distribution of colours is basically ‘which bit is still too white’. Colours are black, brown, grey, orange, yellow, soft yellow, red, magenta, violet, blue, navy, turquoise and green. They came out quite muted, but I do like them. When knitted up, they are more obvious than on the ball.

As for the socks, the instruction booklet for the knitting machine came with patterns in the back so I chose to make the basic socks for men. The pattern is in the images (in Dutch, translation for the image below). For the first try, I cast on exactly as intended, but chose setting 5 on the machine. These socks turned out quite large so I frogged them and started again on a setting 4 on the machine. The length that came out on setting 4 matched the book, so that seemed to have gone well. I’m not sure if I’m seaming them right, they feel quite bulky and I’m not sure that’s nice on the foot. I’ve also discovered that knitting takes about as much time as the seaming. The knitting is very quick, this machine goes a hell of a lot faster than I ever can by hand.

Image translations (left). *Hiel*: heel; *Ondervoet*: bottom of the foot; *Teen*: toe; *Bovenvoet*: top of the foot; *Beenlengte*: length on the leg; *Naad*: seam; *Verkorte toeren*: short rows; *Open steken*: provisional stitches.

After finishing one sock, I brought it to the original owner to try on. He claimed that they were indeed the right size and that the ridges of seaming wouldn’t be annoying. As he’s been wearing machine knit socks like this for a long time, I’m inclined to believe him. So then I set out the knit the second sock with the same settings. It took me a few goes and a lot longer than it should have but in the end, sock number 2 was finished. Before seaming it together it does look really strange and not what you expect. Once the seaming is finished however, it does look like socks. I’m amazed.

I really enjoyed the process, can’t wait to make more things on this machine!

Impromptu Dyeing

First batch of ecoprinted scarves this year, fresh leaves – fresh results.

I had a week of holiday recently and one day decided to go out for a short walk. Maybe to drop of plastic trash, maybe to post a letter, I can’t really remember. While out, I noticed all the green around, leaves are really returning to the trees and plants. So while walking along, I picked some leaves here and there. I came home with a hand full of greenery and a desire to do some ecoprinting. So I got all of my stuff from the dyeing cupboard, mixed up some additional iron water and got to work. The layout is fairly random with one scarf being less densely printed than the other. All leaves were placed with the top side up, which obviously gives a different effect on the mirrored bottom-up side.

Ecoprinting is still super interesting to me. I should probably take more extensive notes on what I’m doing because I can’t really predict what the outcome will be, but that has its charms too. You can see that most of the well printing leaves on the right scarf are at the top and then one in the middle. The left one is more uniform in what printed dark and what printed light. I like these results. Unfortunately, the source of my previous batches of silk no longer lists it on its website, so I’m going to have a more expensive time getting hold of something to print new projects on. Que sera sera.

Category: Dyeing