Turquoise – Hopefully Creative

Turquoise Sweater

Machine knitting a self-dyed sweater with big sleeves.

I’ve been wanting to make a wide sleeve, long narrow cuff sweater for a while. But the search on Ravelry didn’t want to provide me with sweater options that I liked, so I continued looking. Eventually I stumbled on a 30s sweater pattern from Etsy that looked promising. I purchased it and promptly found out that it wasn’t as helpful as I’d hoped. The instructions don’t say anything about the ribbing that’s used in the pattern images, for example.

Front of turquoise sweater on me with arms up to show the sleeve buttons

In the end I settled on dyeing four skeins of crazy eight dk yarn with spruce and teal, plus some black speckles. The original patterns requires you to knit the bottom hem first, and then increase to the front and back panel, same with sleeves, cuff first and then increase. However, when I started this sweater I didn’t have a ribber attachment for my knitting machine yet, so I started with the back panel above the hem. I’d figure out how to do the hem later.

4 skeins of yarn 'crazy eight DK' dyed with dark green / teal and black.

Sleeve detail of ribbed turquoise sweater with 8 buttons.

The front, back and sleeve panels are basically the same. With the only difference being that the the front panel needed to be cast off sooner than the others. Presumably for a lower neckline in the front. After having knit those four giant panels, I only had about 40 grams of yarn leftover. That didn’t seem like it would ever be enough, so I dyed another skein. This one turned out a little lighter, so it was good that I was only supposed to use it for the hems and cuffs.

Front of turquoise sweater on a mannequin

Side of turquoise sweater on a mannequin

I have since also acquired a ribbing attachment for the knitting machine and set about learning how to do the cuffs. It took a few tries, but it’s definitely quicker and more even than hand knitting. I kitchenered the ribbed sections to the corresponding body parts and left sections open for buttons. The overlapping edge gets stitches picked up in a regular interval, where some stitches are not picked up on purpose for the button holes. Then a garter edge is knit for some stability. Buttons are attached on the other edge and that allows all buttons to be functional.

Neckline detail of turquoise sweater with 5 buttons.

Neckline of turquoise sweater on a mannequin

I decided to increase the neckline height at the front to the same level als the sleeves and back piece. I still don’t know how they expected things to line up with them not being the same height. But fine. It’s now done, and I really love the colour – it doesn’t show up on camera accurately at all, but in person it’s great! It wears well, even if the sleeves are somehow just a little bit too short.

Green & Blue

Almost stripy scarf in blues, with little eyelets along the way.

Another knitting machine experiment. I wanted to see if I could make a triangular scarf that wouldn’t grow as fast as most of the ones I’ve tried before. As such, there wasn’t a published pattern involved with this, just one I made up as I went along. The yarn was Alpaca 4ply sock, dyed with one side dark blue and the rest turquoise on 28 March. The scarf itself was started on May 2nd.

The experiment was quite nice, and you can really see the effect blocking has on pointy things. The scarf has a much better point after blocking even though the edges continue to curl a little. I’m not sure I mind though. I really like the striped effect that this dye job created.

This is the pattern:

CoR e-wrap cast on 6 stitches from 70L to 65L.
Knit 3 rows (CoL).
*Transfer the second and third stitch on the left, one needle to the left. Transfer the last two stitches one needle to the right (this creates two eyelets and one increase). Knit 4 rows.*
Repeat ** until there would be 11 stitches between the eyelets on the increase row. In that row transfer the middle stitch one needle to the left to create a decorative eyelet. Knit 4 rows. (Decorative Eyelet Section (DES))
Repeat ** 3x (15 rows from last middle eyelet); and repeat DES (the decorative eyelet will be two needles to the right.) Once there are enough stitches between the side eyelets, make decorative eyelets by transferring the 10th stitch from the center eyelet to the needle on the left.
Repeat until half of the yarn is knit.
Create the second half by e-warp casting on 6 stitches on the right and reversing all shaping.
Use a three needle bind of or some other method of attaching the two sides together.

Proof of Concept Dyeing

Trying out some more dyeing ideas.

“What happens if you separate out random partial sections of yarn and dye those a different colour?” Was the question that spurred the 28 March round of dyeing yarn. I wanted to try and see if it would 1) be possible to even separate out different parts without making it impossible to ball up later and 2) whether that would then create a more random pattern. I started with two skeins of Krypton 4ply yarn and started pulling out random strands and strand sections. The majority of the skein was dyed with a low percentage of black. It’s more grey in appearance because of that. The strand sections that were left out were dyed a nice dark green.

The second skein was Alpaca 4ply sock and got the same separation treatment. I wanted to dye this a bright light blue/turquoise colour with the contrast being navy. However, part of the skein that wasn’t supposed to be navy fell into the pot so there are some more blue spots than intended. I also had another skein of Alpaca 4ply sock that was dyed in some leftover yellow dye. Later, some orange and brown speckles were put over the top.

The first and second experiment also had some leftover dye in the pot, so I wanted to test out the Tweed Effect DK yarn that’s been hanging out in the cupboard too. I took a full skein and started it on the yarn winder until about half was into a ball. Cut the skein and had two tweed experiments. The ball was unwound gain and dropped dry into some blue dye. It did actually take on the barber pole effect that was indicated on the website. The green experiment was not as successful. The yarn came out very uneven and without much barber-poling.

After these experiments, I’ve been able to answer question 1. Yes, it is possible to separate out without making it impossible. It did take a bit longer than normal because certain bits didn’t want to let go of each other. I’ve not gotten around to question 2 though. I’ll report back once these yarns have reached either the knitting machine or the needles!

Yellow – Turquoise – Orange

Made some baby gifts from self-dyed yarn and other happy fabric.

Baby gift time again! First up, dyeing. On the last day of 2022, the second dye project was a single skein of Chester Wool DK 115 (Worsted) 50s. It is 100% merino and has 50 grams in a skein for around 100 meters of yarn. Since I still had soft yellow dye stock left from the other dyeing I did that day, I put 20 ml of the stock in my pot. Then I added several resists around the skein and dropped the thing into the pot. When it had simmered for long enough, I took it out and dyed the resists turquoise. I couldn’t resist adding some speckles and chose orange. All in all this meant that the skein turned out extremely bright and cheerful. If you ask me, perfect for a baby.

Since there was going to be a new baby, I set out to make some baby things and settled on these two patterns: Easy Peasy Baby Ball by A la Sascha and Tiny Tot by Kristen Rettig. One is a rectangle hat with tassels or pompoms and the other is a ball. I used up the entire skein in the making of these projects, so no leftovers!

I’ve also had a bit of flannel in the stash with a similar colour scheme. There’s also some additional red and green, but I wouldn’t let that stop me. The flannel was bought to make some poppies, so I set out to do exactly that. I tried to make these somewhat symmetrical with the plaid, so the scale was based on that. There’s some difference between these two poppies, one has a green stripe near the head, the other green. One has larger hands, the other smaller, but they are still very similar.

Both knitting patterns were quick, easy to knit and went smoothly. Of course the hat is way too big for the recipient, but I guess my track record stays intact on that score. The last item for the little baby was a spit scarf. Now with skateboarders, rope jumpers and a terry cloth back. It feels very soft even if the snap is on the wrong edge.

I hope the little one will have a marvelous and colourful life!

New Year’s Dyeing

Experimenting with yarn and different methods of heat setting, resulting in three different colourways!

After not sleeping enough with the fireworks still going for hours beyond midnight, completing the puzzle I started in 2021 and finishing up the last oliebol, I got to work on new years day. I’d been thinking about dyeing yarn all holiday week, and just.. didn’t get up to actually do it. I’d decided I wanted to try a few different things, oven dyeing, speckles and partial dip. I used three different yarns, all from World of Wool in the UK.

The one that I started with was some 56’s English Superwash Aran Weight, I have six skeins and decided to dye five of them. I kept one spare in case the sweater I want to make with this requires more than 5 skeins. I decided to try and oven dye some yellow and orange speckles citric acid speckles on it. The oven dyeing initially came from a blog post by Needles on the Move found here. The citric acid speckles from ChemKnits Tutorials on YouTube. I mixed soft yellow dye in a little pot with citric acid, and in another pot I mixed soft yellow dye and red dye with the citric acid. The yarn was put in a second hand roasting tin and the dye mixes sprinkled on top. Unfortunately, due to the water that needed to be added, this batch turned out a little bit runny, so the colours are not as defined as I would have liked them. Afterwards, I found a blogpost by The Impatient Dyer here, that talks about how to solve that problem.

I wasn’t going to wait for quite some time for the roasting pan to be free again to dye the other skeins, so I just used my dyeing pots for those. One has a steamer insert on which you can drape the yarn and then add the colour. The other has a steaming section for doing the same thing. These speckles turned out a bit clearer. You can maybe make out some small hue differences in the skeins that are hanging above. The two right most ones are more muted with speckles that were less clear.

The next type of yarn was sock weight, Merino Superwash / Bamboo Sock Weight. I decided to go for some blue and turquoise but with lots of white. The dye was mixed with citric acid, put onto the yarn and then the wool went into the steamer pans. I think it looks cute and I am looking forward to see what it looks like knit up into a project. In case that project will be socks, I ball them up into two ~50 gram balls that are still connected to each other, so that I know for sure how long my sock can be without running out of yarn.

This last yarn was an experiment. The base is Merino Superwash Sock Weight Singles. I wanted to dye a skein partly grey with some speckles of orange. So I dumped an amount of grey dye in the water and partly hung the skein in that dye water. The remainder of the skein was draped over a steamer inset and speckles were applied. Some grey with citric acid and to create the orange I mixed some red and yellow dyes in the citric acid.

When this skein was rolled into two ~50 gram balls, it changed the look a lot. The skein has a dark section whereas you can’t really see that in the balls. I’m really curious to see it knit up. To turn the yarn into balls, I use this weird contraption that I got from a secondhand store for 3.50 euro – maybe used for spinning? In combination with a small empty bottle to allow for a centre pull ball. While it takes forever to wind up over a kilometer of yarn, I was very happy once it was all completed. The yellow/orange yarn is already being knit up into a project that’s about 90% complete, so I hope to finish that soon. There are no intentions for the two sock weights as of yet.

Warm Birdies

A while ago, I found a bit of fabric that was black and green with birds, reversed on both sides. The black side was somewhat more fluffy and felted, the green side looked more like threads. At some point, again, a while ago, I was cold and wanted to make something warm. This fabric seemed to fit the bill. I chose a pattern from Simplicity Naaimode 31 – patterns 1-4 (also known as New Look 6474). I chose the smallest size, shortened it by a lot to make sure it fit on my limited piece of fabric and started sewing.

Once the basic shape was finished, I put it on and it looked horrible on me. I can’t even describe my feelings about it. Still, I liked the fabric and wasn’t sure what to do at that point. Then I thought of something, perhaps it would fit my mother better. She’s also generally cold and likes colourful things. So wearing something green with birds on, shouldn’t be an issue.

I brought the thing to my parents and asked her if she liked it. She did, so I decided to finish the seams. All seams were folded inwards and sewn down, so it now looks quite nice on the inside. This means that it can be worn with the black side out.

The outside edge and sleeve edges have been finished with bias tape, this also looks neat on the side. I made a little loop at the outside neckline edge, so which ever way it is turned, it can still be put on a hanger. There are also pockets on the green side, which can be used when worn.

I hope she’ll get some joy out of it, and if not, someone else might. I’m just happy it did not end up in my corner of shame…

Tiny Knits

I had to travel about 7 hours this weekend, so in preparation for such a trip, I downloaded a number of tiny animal knitting patterns. I figured it was more fun to bring a number of different balls of 5-10 grams in different colours, rather than one big ball in only one colour. In the end I managed to knit 5 little ones on the road and a pentapus before I left. The knit critters were a crab, a whale, a crocodile, an alien and a pig.

All the instructions were followed completely, apart from eyes which were all made with a thick yarn knotted twice.

Teeny Crab by Amanda Berry and Teeny Whale by Amanda Berry.

Baby Gators by Anna Hrachovec

Mini Alien by Barbara Prime and Tiny Piggy by Amanda Berry

The whole gang together! I have some more patterns, so chances are that a mouse or a sheep or a chicken will join the flock…

Tag: Turquoise