Blue Pants

I wanted to gift a pair of pajama pants to a family member recently. So I found a free pattern online from Life Sew Savory in size L. Once it was printed out, it was so large that the only fabric I could realistically use was the blue mask fabric. I don’t think I’ve ever seen such a large pattern piece – there are no side seams, so that’s why it’s so enormous. I added a few centimetres to the bottom to increase the length, although I’m not sure if it was needed.

In the end, I put in the elastic at a later point in time based on a different pair of pants of the recipient. I haven’t yet seen if these actually fit, so that’s still a guess. For now, I’m quite happy that I did manage to finish them and I still love the colour.

Compared to me, they are certainly quite large…

Overenthusiastic Masks

Since I still had blue fabric left, I decided to make a few masks.

Sadly, I got carried away, and I now have 17 more masks for my one-person-household. They do all have wonderful images on them, which is the reason there are so many. I got trapped in a cute images hole on Pinterest and just wanted them all. Since I had the capability, I made them all.

From left to right and top to bottom: Up, Meow, Fish, Sheep, Not Today Cat, Cactus, Bear & Hedgehog, Combined Snow Globe, Rabbit, Triceratops, Free the Bird, Apatosaurus, Stegosaurus, Tea Rex, Sleepy Panda, Pterodactyl, Plesiosaur

They are effectively the same as the six I made previously, the only difference being that I eliminated the middle layer. Sewing the chin seam 35 times was enough – I accidentally made a lining to many, which is why there are 35 chin seams. I enjoyed locating my other fabric markers and playing around with them. The plesiosaur and the little triceratops are my favourites. Although Not Today Cat is a mood that happens a lot. I don’t think I’ll ever dare to wear the meow one, but the font was so funny that I had to use it too.

The pattern I used comes in different sizes, I made the size S for me. However, I’m unsure if people around me have the right amount of face if I ever wanted to gift one (or more) of these. As of today, they are mandatory in public transport in the Netherlands – not in everyday life though. But I’m sure I’ve got enough to see me through plenty a rail-journey.

Blue Masks – Two Ways

With the whole virus situation, the Dutch government has announced that people need to wear masks in public transport from June 1st onward. Since public transport is my only transport for distances greater than 10 km, I knew what I had to do.

So I got a cotton bed sheet, and cut out a few masks. The first iteration had a center seam and is a pattern from Burda. It’s quite quick and easy, the main problem is attaching the elastic and the main benefit is that it has a pocket for an additional filter.

Yesterday, I decided to put another pattern to use, promoted by Male Pattern Boldness. The ‘Free Face Mask Pattern and Tutorial’ by Dhurata Davies. Benefits of this is that it has three layers and that the bottom and top strap are one long one so its easier to adjust.

I also decided to add some fun images to these ones. If I need to wash them after use, I need to make sure that I know which one I actually used. So I looked over my pinterest boards and chose some images, I’ve listed the pins below. I printed those, traced them on my window and then traced these traces onto the fabric. I don’t know how the fabric marker will hold up, but at least I tried, right?

From left to right and top to bottom. Fox, Paper Plane, Plesiosaur, Cactus, Waves & Boat, Mouse with Mushroom

I do not enjoy wearing masks, but I guess I’m going to have to suck it up and do it.

Nutty Bag

A while ago, when we were still allowed to be in places with lots of people, I went to a giant flea market with friends. Sadly, spoils were little. I only came home with a tropical bird onesie. However, I did spot something that I thought was awesome. A little bag made out of a coconut. Clearly I needed one for myself. However, the one at the market had some holes in, and I didn’t want to pay the price they asked.

(Evil crooked coconut)

Last Sunday, I got my butt in gear and started on my Coconutty bag. I bought a coconut from the supermarket that already had a groove such that it should split nicely. The first one, however, did not split completely down its seam. This bothered me enough that I bought another coconut to try again. That second time, I didn’t take any chances and just sawed the coconut in half. Then I drilled holes along the side to attach a zipper. I sort of prick-stitched the 40-cm zipper in place. The ‘drinking’ hole for the coconut was already punched, so I made a second hole on the opposite side for a strap. Lastly, I made a fabric tube of about 22×40 cm with a zip along the short side. That was to be the lining. The lining was attached to the stitches along the inside of the coconut. And Hey Presto, a bag was born.

Now, it won’t be useful in the slightest, since my phone doesn’t even fit. But the idea of the bag had merit and I wanted to try out my DIY skills with the drill again. For now, I love the contrast of the blue with the coconut and find it awesome that I had some cord in the exact same colour. Hopefully, I’ll be able to test it out soon!

Curtains

When I woke up for the third time in three days at 8 o’clock having gone to bed fewer than eight hours before, I finally decided to get my butt in gear and get some curtains. Clearly the roll-thing that was there was not sufficient. I’d previously tried to buy a curtain rod and fabric, but I kept on chickening out, unsure whether I could make it work. Well, Saturday, I decided that I could, so off to the store I went, keeping 1.5 meters distance from everyone as mandated.

I got 4 meters of a white fabric that should not let any light through and four meters of some outer fabric. Got some curtain tape, a pre-assembled curtain rod and went on my merry way. I used the lines on the outer fabric to iron hems and edges into place and then put the lining and the curtain tape on. Sewed it all down, installed hooks and it was good to go.

The before and after is quite striking considering it’s broad daylight outside. I don’t know whether it will have much effect on my sleep. However, the fact that I managed to hang up curtains all by myself (I used a drill and everything) is as much of a boost as getting more sleep will be. At least for now.

Snow Season

While Spring has officially started a few days ago, I got the itch to do something with snow at the beginning of March. This paved the way for the Snow Season sweater.

It started a while ago when I’d purchased the yarn for the Pocket Coatigan. I got some more in different colourways; 3 balls of blue and 2 of white. I’d thought about making some sort of dual coloured sweater. The exact plan was not decided. So I went off to scour Ravelry some more. I stumbled across a sweater called Scatter by Þórunn Vilmarsdóttir. While I liked the idea of a gradation in my sweater, I didn’t exactly like the execution. So I continued to search for a raglan base in the correct gauge, which I found in Mud Season by Elizabeth Smith.

The cast on was on March 2 (this is the project description), and this was a very quick knit with size 5.5 mm needles and quite thick yarn. Just below the division for the arms, I started incorporating some white yarn. There was some vague rhyme and reason to the design but the plan was to make it look random. At some point I decided to reverse back to blue and did the whole snow storm again. For the arms, I wanted to end those with the white too, so I snowed the bottom. Once it was finished, I wore it for a day and the sleeves shrunk by at least 5 cm. So I took out the ribbing, added more white and then redid the ribbing. I’d already taken pictures, so just imagine more white at the bottom of the sleeves and it’ll be fine. Funnily enough, the length as I wear it is now exactly the same as in the pictures. It’s just that it doesn’t migrate to above my wrist when worn for some time.

So far it’s nice to wear. I like the little holes and it just makes me happy. Once I finished the original, I cast on the same pattern again. Now in grey. I hope to incorporate some of the changes that came out of the first version and then we’ll see if I can get this one finished in less than two weeks. With the travel time to work reduced to zero, there may be some options..

Graduation in Red

For last week’s graduation ceremony, I tried something new. I’d found a picture on Pinterest, links below, that I really liked. So I set out to recreate it. I didn’t want to use grey plaid from my hoard, so I chose something completely different. A red fabric with specks of different colours, including some light blue.

So, I set out to create something resembling the pictures. Since I knew that the top and sleeves needed to fit and the rest could be loose, I chose to use the top of the bodice up to the armholes and heavily altered sleeves of the Garden Party dress. Then I just extended the side seams out to create a giant tent shape. I added some pockets, because a dress without pockets is just a torture device, and cut out light blue leather strips. The fabric itched, so I added a brown lining for the sleeves up to the waist. The lining was the original Garden Party bodice, but now with the darts sewn as shallow pleats.

Once the dress was sewn up, I needed to get the leather strips on. In some long forgotten days, I apparently purchased 10 ‘book screws'(?), that seemed to work quite nice. I used a series of needles and knitting needles to make holes in the dress big enough for the screw to go through and then added the leather strips on. The pleats on the arms are not sewn down at all, and the ones on the waist are only tacked on the front. To make it easier to get in and out of, I found some leather laces to thread through the zipper. And that was that!

I did get some compliments on the day, so that was nice. I do want to wash it, but I’m not sure how the leather and screws will hold up, so we’ll see how that went in about an hour..

Pussycat Bow Blouse

I think this blue and black polka dot fabric actually came from the market in Rotterdam. I’ve since used it in two different projects. The first finished one was the Pussycat Bow Blouse from VeraVenus.com. This was supposed to be a darted kimono sleeve blouse with a tie to create a pussycat bow. I printed the pattern, taped it together and used it to cut my fabric. I didn’t take pattern matching into account, so the dots are not completely aligned across the front. I debated for a while whether I cared and decided not to.

Due to fabric shortage, I had to cut the tie from 4 bits of fabric instead of one or two. I don’t think it’s very noticeable though. The other deviation I made was to close the darts a lot further than the pattern indicated to create a more fitted silhouette. It’s still quite loose in the body, but the tie is generally a little tight, so it’s a fascinating piece to wear. I’m still trying to figure out what other clothes it goes with. I do hope I can get it into general rotation soon.

Knitting Needle Case

Sometimes you just have to impulse buy a full set of interchangeable knitting needles with cables and other bits and pieces, right? Anyway, once that hurdle has been taken, you need a place to put all those needles and other bits. So off to the pinterest I went for some inspiration. In the end I settled on using the case from Sew Fearless as my jumping off point. Found some of the quilting fabrics in my stash, bought a bit of vinyl tablecloth and located a set of zippers to get me started.

It’s got a couple different elements. First, a center pouch with two vinyl pockets along the outside that close with a zipper. The pockets are split into two to house more of the cables. Then I added an additional zipper along the top (more storage!) and finished the pouch with the blue bias tape I used on my quilt. Then I created the needle holding section on the lining. Lastly, I added another zippered pocket, this time split in three, on the other side. There’s some elastic to hold pens and one other pocket that doesn’t have additional closures. The outside has a handle also made from the bias tape and I added some fusible padding. Lastly, I added a double sided zipper to allow some opening and closing.

So far, it seems to hold up and is quite easy to spot in my very chaotic sewing room. We’ll see how it works when I’m doing more knitting and will actually use it.

Poppers on Plaid

At some point a while ago, I impulsively went to the fabric market in Utrecht. I’d woken up really early and got myself on a train by 7:25. The fabric market in Rotterdam was not up and running yet at 9 when I got there, so I decided to trek on for another hour and go to Utrecht. Met my parents there and had a good time with them. I also got a number of fabrics to play around with. Two of those were destined to be together, one blue plaid with brown stripes and a brown fabric.

 

I started with the blue plaid and made a shirt out of it. The pattern was the same as for Red Birds and Foxes, Simplicity Naaimode 9, model 59 (aka Simplicity 2255). I downsized the pattern to a size 34-36(ish) and changed the back darts. Once it was sewed up, it was decidedly too long, so I cut off about 5 cm. It closes using snaps (or poppers). Since I bought myself a snap-setting-tool, I’ve been trying to put snaps onto everything. There is little more satisfying then undoing poppers like the hulk when undressing.

For the next iteration (and there will be a next iteration), I’ll make sure to make the armholes smaller. For this version they are a little too big, in a sense restricting a little movement. The side seams on the pattern are not equal, and I might fix that on the pattern for next time. I do still enjoy wearing it, so all’s well.